Your Position :
Home » Products » Plastic Road Stud Reflectors For Bike Path or Park F1

Plastic Road Stud Reflectors For Bike Path or Park F1

Thickness: Only 11mm
Warranty: 18 Months
Body material: PC(Japan Brand)
Visual distance: > 800m
Load Bearing: 20 Tons
Working Mode: Flashing or Constant
Waterproof: IP68
Shank: Without shank

Product Introduction

Plastic Road Stud Reflectors Features:
•High brightness America brand led light with 100000 hours of working time.
•USA brand solar panel. 22% high conversion rate. Fast charge rate.
•Thickness only 11mm, Road Stud Reflectors friendly to bicycle and motorcycle wheels.
•Anchor holes or the adhesive bond for dual fixation.
•Long life span 5-8 years.
•Road Stud Reflectors accept OEM/ODM

 

plastic Road Stud Reflectors color
Five colors for choice: White, Amber, Red, Blue, Green

Plastic Road Stud Reflectors Parameters:

 

   Material: PC(Japan Brand)
    Power supply: USA Brand Flexible High Efficient Solar Panel 5.5V/80MA
    Battery: Lithium battery 3.2V/500MA
    Working model: Blinking or Constant
Charging at daytime and working automatically at night
    Life span: 5 years for lithium battery;
    LED colors: Yellow, White, Red, Green, Blue
    Resistance: 20T(static)
    Size: 114*90*11mm  (4.49″*3.54″*0.43″)
    Visual distance: >800M
    Water poof: IP68
    Carton Size: 2pcs/box;100pcs/ctn;weight:14.5kg;carton size:48*27*21.5cm
2pcs/box;100pcs/ctn;weight:31.97bs;carton size:18.90″*10.63″*8.46″

 

Plastic Road Stud Reflectors For Bike Path
Plastic Road Stud Reflectors For Bike Path

Application of Road Stud Reflectors For Bike Path F1:

♥Schools and hospitals
♥Gardens
♥Deck and Dock
♥Walking paths
♥Bridge
♥Parks and campuses
♥For Decoration

 

How to install Aluminum Road Stud Reflectors with shank F1:

1. Determine the installation location and distance, clean the surface of the Road Stud Reflectors, and ensure that the Road Stud Reflectors are installed on a flat road surface.
2. Clean the bottom of the Road Stud Reflectors and apply the epoxy glue evenly to the back of the stud.
3. Press the side with glue on the road, secure the position, wait for the glue to dry out.
4. Check within 2 hours of installation to ensure that all Road Stud Reflectors are properly installed and do not bend or deform due to compression.
5. Please evacuate the installation isolation facility 6-8 hours after installing the Plastic Road Stud Reflectors.

Online Message
If you have any question or comment, please contact us without hesitation.
Stay connected
RUICHEN create intelligent solutions that make road safety work.
Inquiry
Copyright © Henan Ruichen Traffic Equipment Co., LTD All Rights Reserved